Basic Info.
Breaking Capacity
High Voltage Circuit Breakers
Speed
Normal Type Circuit Breaker
Function
Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Certification
ISO9001-2000, CNAS
Rated Voltage
12kv, 24kv, 36kv
Rated Current
up to 1250A
Breaking Current
up to 31.5ka
Transport Package
Paper Carton
Specification
150/210/275mm
Product Description
Product | Medium voltage SF6 load breaker switch |
Rated voltage | 12KV, 24KV, 36KV |
Rated current | up to 1250A |
Breaking current | up to 31.5KA |
Product Description
FL(R)N36-12(D) Load switches and combiners (hereinafter referred to as "load switches" and "combiners") are suitable for three-phase ac power systems of 10kV and 50Hz. This product as industrial and mining enterprises, high-rise buildings, residential quarters, pre-installed type substation, for the breaking, closing load current, the fault current, control and protection circuit and the power distribution transformer.
Normal operating conditions
a)Ambient air temperature is not more than 40 ºC, and at 24 h closed to the average no more than 35 ºC. Minimum ambient air temperature 25 ºC.
b)The effects of sunlight can be ignored
c)No more than 3000m above sea level.
d)Ambient air is not significantly contaminated by dust, smoke, corrosive and/or flammable gases, vapors, or salt fog. If the user does not have special requirements, the manufacturer may consider that these situations do not exist.e)The humidity conditions are as follows:
--The average relative humidity measured within 24h is no more than 95%.
--The mean value of water vapor pressure measured within 24h shall not exceed 2.2kPa.
--The average monthly relative humidity should not exceed 90%.
--The average monthly water vapor pressure does not exceed 1.8kpa. In such conditions appear condensation occasionally.
e) The vibration or ground motion from the outside of the switching equipment and the control equipment has no obvious relationship with the normal operation mode of the equipment. If the user has no special requirements, the manufacturer may not consider these situations.
GB 3804-2004 3.6KV~40.5KVHigh voltage ac load switch
GB 16926-2009 High voltage ac load switch fuse combination electrical appliance
GB 11023-1989 Test guide for fln36 gas seal of high pressure switching equipment
GB 1985-2004 High voltage ac isolation switch and ground switch
GB/T 11022-2011 Common technical requirements for high voltage switching equipment and control equipment standards
Item NO. | Name | Unit | Technical parameters |
Load break switch panel |
1 | Rated Voltage Un | kV | 12 | 24 | 36 |
2 | Rated Frequency | Hz | 50 | 50 | 50 |
3 | Rated Current | A | 630 | 630 | 630 |
4 | Rated Load Breaking Current | A | 630 | 630 | 630 |
5 | Rated Short Time Withstand Current(rms) | kA | 20 | 20 | 20 |
6 | Rated Short Time Duration | s | 3 | 3 | 3 |
7 | Rated Peak Withstand Current | kA | 50 | 50 | 50 |
8 | Rated Closed Switch - Off Current | A | 630 | 630 | 630 |
9 | Rated Cable Charging Breaking Current | A | 10 | 10 | 10 |
10 | Rated Active Load Breaking Current | A | 630 | 630 | 630 |
13 | Earthing Switch 2s Short Time Withstand Current | kA | 20 | 20 | 20 |
14 | Rated Short-Circuit Current Making Times | times | 2 | 2 | 2 |
15 | Rated Current Breaking Times | times | 10 | 10 | 10 |
16 | Mechanical Endurance | Load Break Switch | times | 3000 | 3000 | 3000 |
Earthing Switch | times | 2000 | 2000 | 2000 |
17 | SF6 gas anual leakage rate≤ | | /year | 0.10% | 0.10% | 0.10% |
18 | Rated Insulation Level | Unit | Technical parameters |
1min Power Frequency withstand voltage(rms) | On isolating distance | kV | 48 | 60 | 110 |
Phase to Phase | kV | 42 | 50 | 85 |
Phase to Earth | kV | 42 | 50 | 85 |
Lightning impulse withstand voltage(peak) | On isolating distance | kV | 85 | 145 | 215 |
Phase to Phase | kV | 75 | 125 | 185 |
Phase to Earth | kV | 75 | 125 | 185 |
Product Parameters
Detailed Photos
Certifications
Company Profile
Packaging & Shipping
Our Advantages
1. R&D Ability
We are specialized in the field for more than 10 years, and has a well experienced R&D team taking the design and development work for each project based on customer's special demands.
2. QC Team
We have extremely strict QC procedure from components to finished products.
3. Production Capacity
Steady production period within 15 days.
4. High Quality Product
We have full set of test reports for products and are supplying for the world's largest utility - State Grid Corporation of China(SGCC) and China Railway Construction Group.
FAQ
Q1: Are you factory or trading company?
A: Factory, we can guarantee our price is reasonable and competitive.
Q2: When can I have the price?
A: Usually we quote within 24 hours after receiving your inquiry.
Q3: How could I get a sample?
A: If you can not buy our product in your local area, we will ship a sample to you. You will be charged of sample price plus all related shipping costs.
Q4: Can we print our logo and company name on products?
A: Yes, of course, we accept OEM.
Q5: What is the lead time?
A: The lead time depends on the quantities ordered, normally within 7-20 days after receiving the payment.
Q6: How's your quality control process?
A: All products will be inspected starting from accessories, and will be carried out with routine tests before leaving
our factory.
Q7: How to solve the quality problems after sales?
A: Take photos or video of the quality problems and send to us for our checking and confirming, and we will make a satisfied solution for you within 1-3 days.
Q8: What's the warranty time?
A: 12 months from shipping date.
Q9: Why choose us?
A:1.We are specialized in the field for more than 10 years, and has a well experienced R&D team taking the design and development work for each project based on customer's special demands.
2.We have extremely strict QC procedure from components to finished products.
3.Steady production period within 15 days.
4.We have full set of test reports for products and are supplying for the world's largest utility - State Grid Corporation of
China(SGCC) and China Railway Construction Group.
Address:
No. 298, Wei17 Road, Yueqing Economic&Development Park, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Zhejiang Usune Electric Co., Ltd. Was established in 2011. Since its foundation, USUNE has become a high-tech enterprise integrating the R&D, manufacturing and sales of prefabricated substation, low voltage & medium voltage switchgear and switchgear accessories. It has a registered capital of 12 million US dollars, covering a production area of 4, 300 square meter and having staff of 150 people, located in Yueqing Economic Development Park.
Main business,
Power distribution and supply equipments up to 36KV,
1. Prefabricated substation
2. Distribution switchgear equipments
Low voltage switchgear, medium voltage switchgear, ring main unit(gas insulated type & air insulated type), solid insulation switchgear, DC panel and power factor correction systems.
3. Power transformers(oil immersed type & cast resin type).
4. Switchgear accessories
Vacuum circuit breaker, SF6 load break switch, earthing switch, isolating switch, contact box, wall bushing, insulator, current transformer(CT), voltage transformer(PT), etc...
USUNE has a well experienced R&D team taking the design and development work for each project based on customer′s special demands, independently produce and integrate products from more than 200 high quality factories. We have extremely strict QC procedure from components to finished products and maintain steady production period within 15 days. We have full set of test reports for products and are supplying for the world′s largest utility - State Grid Corporation of China(SGCC) and China Railway Construction Group.
USUNE has established a sound management system in accordance with ISO 9001 Quality Management System, ISO 14001 Environmental Management System, ISO 45001 Occupational Health and Safety Management System and other standards.